• • Chassis specifications
• 2010 Ford F-550
• Crew Cab
• Wheel base 176”
• Cab to axel 60”
• 17,950# GVWR
• Duel rear wheels
• Alternator 200-amp extra heavy duty
• Battery 750 CCA, 78-AH, dual
• Brakes – 4-wheel Anti-lock Braking System
• Engine–6.4L V-8 OHV Turbo Diesel
• 5-Speed Automatic OD
• Electric Shift on the fly Four Wheel Drive (4x4)
• Fuel tank – 40 gallon aft-axle
• Stabilizer bars – front & rear
• Stationary Elevated Idle Control (SEIC)
• Steering – power
• Trailer wiring – 7-wire harness w/relays, blunt cut & labeled
• Transmission – TorqShift 5-Spd Auto
• Bumper – Chrome
• Fender vents – front
• Front License Plate Bracket
• Glass – solar tinted
• Grille – Chrome
• Headlamps – Jeweled
• Lights – roof/marker clearance lights
• Mirrors – manually telescoping trailer tow mirrors w/manual glass & 2-way fold
• Tires 225/70Rx19.5G BSW All-Season (6)
• Tow hooks – (2) front
• Wheels– 19.5" argent painted steel
• Window – rear, fixed
• Air conditioning – manual
• AM/FM stereo w/digital clock & 2- speakers
• Door trim – armrest/grab handle and reflector
• Floor covering – black vinyl full
• Mirror – rearview 11.5" day/night
• Power point, auxiliary
• Scuff plates – color coordinated
• Seat – HD vinyl full bench w/recline
• Sun visors – color coordinated cloth, single driver w/pocket, single passenger w/mirror insert
• Up fitter switches (4) on the instrument panel
• Windshield Wipers – interval control
• Air bag driver & front passenger
• Belt-Minder® – chime & flashing warning light on I/P if belts not buckled
• Safety Belts – color coordinated w/height adjustment (front outboard seating positions only)
• Skid Plate Transfer Case 4x4
• • Apparatus body specifications
• Aluminum flatbed body shall be 108” (L) x 96” (W)
• (2) 36” (H) x 22” (D) x 104” (L) custom toolboxes shall be installed
• (4) Compartment Shelves (1-Each compartment)
• Standard rear step bumper
• Emergency lightbar shall be mounted to toolbox lightbar head rack
• Front 2” receiver hitch shall be installed to accommodate portable winch mounting
• Rear 2” receiver hitch shall be installed to accommodate portable winch mounting
Pump
• 300 gallon water skid type poly tank (lifetime warranty)
• 10 gallon foam cell
• 18 hp Darley / vanguard (2be-18v)
• o 375 gpm @ 25 psi
• o 300 gpm @ 45 psi
• o 100 gpm @ 140 psi
• Pump shall be equipped with a Briggs & Stratton 4-cycle
• Pump shall be a 12-volt electric start with a recoil back-up
• Stainless steel impellers shaft
• Bronze impellers
• Scotty around the pump foam system
• (1) Electric rewind aluminum Hannay booster hose reel
• Booster reel shall be mounted above pump facing rear of apparatus
• Booster reel hose roller/guide shall be installed at rear of apparatus
• 100’ of 1” booster hose
• (1) 3” suction intake
• (2) 1 ½” Preconnect cross lays with Mattydale swivels
• (1) 1 ½” intake
• Self priming suction up to 19 feet
Electrical
• Cab mounted 47” led emergency warning lightbar
• Lightbar shall consist of (12) generation 3 led modules
• Lightbar warning lights shall be controlled by an independent switch mounted in cab
• Led forward facing take-down scene light shall be incorporated in lightbar
• Takedown lights shall consist of (2) generation 3 led modules
• Takedowns shall be controlled by an independent switch mounted in cab
• Left takedown shall be controlled by an independent switch mounted in cab
• Led left side facing alley scene light shall be incorporated in lightbar
• Left alley light shall be controlled by an independent switch mounted in cab
• Led right side facing alley scene light shall be incorporated in lightbar
• Right alley light shall be controlled by an independent switch mounted in cab
• Alley lights shall consist of (2) generation 3 led modules (1-perside)
• Rear facing traffic advisory shall be incorporated in lightbar
• Traffic advisory shall consist of (6) amber generation 3 led modules
• Traffic advisory shall have (3) selectable flash patterns (left, right, warning)
• Traffic advisory light controls shall be mounted in cab
• Electric warning siren shall be installed
• Siren speaker shall be installed in front bumper
• (2) Red led flashing emergency warning lights shall be incorporated in front grill
• (1) Red led flashing emergency warning lights shall be incorporated in right front fender
• (1) Red led flashing emergency warning lights shall be incorporated in left front fender
• (2) Red led flashing emergency warning lights shall be incorporated in upper rear of apparatus
• (2) Red led flashing emergency warning lights shall be incorporated in lower rear of apparatus
• (2) Amber led flashing emergency warning lights shall be incorporated in upper rear of apparatus
• Amber led flashing emergency warning lights shall be installed under Red emergency light
• All led warning lights shall be controlled by an independent switch mounted in cab
• Underbody lights shall be installed to meet NFPA standards
• (2) 6” oval red led brake/turn lights shall installed
• (2) 6” oval white led reverse lights shall be installed
• (2) White led scene lights shall be incorporated onto driver’s side of apparatus body
• Driver’s side scene lights shall be controlled by an independent switch mounted in cab
• (2) White led scene lights shall be incorporated onto passenger’s side of apparatus body
• Passenger’s side scene lights shall be controlled by an independent switch mounted in cab
• (2) White led scene lights shall be incorporated onto rear of apparatus body (1-perside)
• Rear scene lights shall be controlled by an independent switch mounted in cab
• (2) Work lights shall be installed at pump work area to ensure proper visibility
• All dot & icc light shall be led and installed to meet dot standards
• Front winch quick connect power leads for quick and easy set-up
• Front power leads hall be controlled by an independent switch mounted in cab
• Rear winch quick connect power leads for quick and easy set-up
• Rear power leads shall be controlled by an independent switch mounted in cab
• Kussmaul battery charger kit 2000 shall be installed
• Kussmaul auto ejector
• Kussmaul battery charger display
• (2) 500 Watt telescoping scene lights shall be installed
• (1) 5000 watt power inverter shall be installed
• (1) Hydrant wrench with mounting bracket (Mounting TBD by customer)
• 12000# electric winch shall be mounted on a portable carry tray for front or rear use
• (5) Rechargeable flash light (Mounting TBD by customer)
ROTO RAY WARNING LIGHTS
